FAIZEAL · GOOGLE STORE PRODUCT PAGE COPY · ENGLISH
Meta Title (58 characters):
Lightweight Rubber-Coated Magnetic Wheel FZW80 | FAIZEAL
Meta Description (155 characters):
Custom FZW80 magnetic wheel: weight-reduced Ø80 mm core with a sealed elastomer tread. Same 630 N adhesion, less mass, no exposed magnets. OEM/ODM from FAIZEAL.
Same 630 N Grip, Less Mass: The FZW80 Magnetic Wheel, Re-Engineered with a Sealed Rubber Tread
Alternative titles for A/B testing or additional listings:
1. FZW80-LC Lightweight Magnetic Wheel — Ø80 mm Weight-Reduced Core with Rubber-Encapsulated, Fully Sealed Tread
2. Lightened + Encapsulated: A Custom FZW80 Magnetic Wheel for Dynamic Wall-Climbing Robots
3. From Standard Catalog Wheel to Sealed Custom Build — The FZW80 Rubber-Coated Magnetic Wheel
This product began as one of our standard catalog items: the FZW80 cylindrical magnetic wheel — Ø80 mm outer diameter × 40 mm width, sintered NdFeB magnetic circuit, 25H7 bored hub with keyway, 630 N pull force on a 10 mm S235JR steel plate, 1.45 kg unit mass. A robotics customer came to us with two requirements the standard wheel could not fully meet: reduce the rotating mass, and seal the working surface against corrosion, debris and abrasion with an elastomer encapsulation layer.
The result is the wheel shown here — a two-stage custom build in which the standard FZW80 magnetic core is first mechanically lightened without disturbing the magnetic circuit, then over-moulded with a rubber layer that fully encapsulates the outer working surface. The knurled component in the product photograph is the intermediate stage: a diamond-knurled steel shell whose patterned surface acts as a mechanical key for the elastomer layer.
The finished wheel on the right is the delivered product — black elastomer tread, sealed magnetic circuit, machined mounting face untouched.
Nothing about the adhesion philosophy changed: the wheel still delivers 630 N-class holding force against mild steel at room temperature. What changed is everything a dynamic robot cares about — lower rotating inertia, a compliant high-friction tread, and a magnetic assembly that no longer has any exposed magnet or plated surface in contact with the environment.
This is a representative example of FAIZEAL's OEM/ODM workflow: start from a proven catalog platform, modify exactly what the application demands, and change nothing that does not need changing.
The customization is best understood as three deliberate engineering decisions, taken in sequence: where to remove mass, how to prepare the bonding surface, and what the elastomer layer must accomplish. Each one is described below.
Reducing the mass of a magnetic wheel is not the same as drilling holes in it at random. The magnetic flux path in a cylindrical magnetic wheel runs through the NdFeB magnet array and the steel yoke behind it; removing material from the wrong region thins the yoke, saturates the steel, and quietly erodes the pull force the customer paid for.
Our weight-reduction machining is therefore planned around the flux path:
l Material is removed only from regions of low magnetic flux density — the non-working faces and the neutral zones of the hub web — verified against the field distribution before the first cut is made.
l The shell wall over the magnet array is preserved, so the air-gap geometry and the flux concentration at the tread are identical to the standard wheel. Nominal adhesion stays at the 630 N class.
l The machined core is checked for balance. Because a lightened wheel typically spins faster than a solid one on dynamic platforms, the finished core is dynamically balanced (G2.5 as standard, G1.0 available on request) so the mass saving never turns into vibration.
l The 25H7 bore, keyway and mounting faces are machined after lightening, so shaft fit and runout are held on the finished part, not on a pre-machined blank.
The engineering payoff is a wheel with the same holding force per unit but a materially lower rotating mass — which is exactly what a climbing robot needs when its motors must accelerate the wheels up a wall, over a flange, or around a pipe elbow hundreds of times per mission.
The knurled ring in the photograph is not a cosmetic part. Before elastomer encapsulation, the steel shell surface is rolled with a diamond knurl pattern, and this texture is what makes the rubber layer permanent:
l Mechanical interlock. The knurl creates thousands of micro-anchors. When the elastomer is applied, it flows into the pattern and cures into it, so the tread is locked to the shell mechanically — it cannot peel from an edge, and it cannot spin on the hub under torque, which is the classic failure mode of adhesively-bonded rubber layers on smooth steel.
l More bonded area. Knurling multiplies the effective surface area, raising the bond strength well beyond what a smooth machined surface can offer.
l A visual quality gate. Because the knurl is uniform, any region where the rubber fails to wet the shell is immediately visible during inspection — a simple, honest quality check built into the process.
The finished wheel carries a continuous rubber layer over the entire outer working surface. The encapsulation does four jobs at once:
l Seals the magnetic assembly. Sintered NdFeB is brittle and corrosion-prone; with the tread in place there is no exposed magnet and no plated surface in contact with water, dust, swarf, salt spray or cleaning chemicals. The magnetic circuit is closed and protected.
l Raises traction. The elastomer tread raises the coefficient of friction against steel — including wet, oily or painted steel — so more of the 630 N magnetic force converts into usable drive traction instead of slip. On a climbing robot, adhesion holds you on the wall; traction is what moves you along it.
l Complies with surface irregularities. A thin elastic tread conforms to weld beads, paint steps and mill scale, maintaining real contact area where a hard metal tread would bridge and lose force.
l Protects the surface it climbs. The compliant layer is gentle on coated hulls, painted tanks and finished steelwork — important for inspection robots that must not leave marks.
Elastomer type and hardness are selected per application: polyurethane for abrasion and oil resistance, NBR for oils and fuels, HNBR for elevated temperature and chemical exposure, EPDM for water and steam environments, with typical tread hardness in the 70–90 Shore A range and layer thickness sized to your ground-clearance and traction budget.
If your duty cycle involves continuous heat, tell us the operating temperature — the elastomer choice, not the magnet, usually sets the limit of the encapsulated build.
l Based on the proven FZW80 platform — Ø80 × 40 mm catalog geometry, sintered NdFeB (N35–N52) magnetic circuit, 25H7 bore with keyway; your drivetrain design does not have to change.
l Weight-reduced machined core — mass removed from low-flux regions only; nominal 630 N pull force retained; dynamic balancing (G2.5 standard, G1.0 optional) so the saving never becomes vibration.
l Diamond-knurled shell-to-rubber interface — mechanical interlock instead of glue-line dependence; the tread cannot peel or spin under torque.
l Fully encapsulated, sealed tread — zero exposed magnet or plating; closed magnetic circuit resistant to water, salt spray, dust and cleaning media.
l High-friction compliant tread — better traction on wet, oily or painted steel; conforms to weld seams and coating steps to keep real contact area.
l Surface-friendly operation — elastomer contact protects painted and coated steel structures from marring.
l Temperature range −40 °C to +100 °C for the magnetic core, matching the standard FZW80 rating; elastomer grade selected to match your duty.
l OEM/ODM by design — tread material, hardness, thickness, bore, keyway and balancing grade are all configurable; the standard FZW80 remains available unchanged if you need a mixed fleet.
The base parameters below are those of the standard FZW80 catalog wheel; the customized features of this build follow in the second table.
Base platform: FZW80 cylindrical magnetic wheel (W Series)
Parameter | Value |
Model | FZW80 (customized variant shown) |
Outer diameter D | 80 mm |
Wheel width W | 40 mm |
Bore d | 25 mm, tolerance H7, with keyway |
Key width b | 8 mm |
Key depth (to keyway bottom) h | 26.7 mm |
Magnet material | Sintered NdFeB (N35–N52, SH/UH/EH grades on request) |
Housing | Low-carbon steel shell; 304 stainless optional |
Pull force (nominal) | 630 N on 10 mm S235JR steel plate, room temperature |
Operating temperature | −40 °C to +100 °C (magnetic core) |
Standard unit mass | 1.45 kg (standard FZW80); customized build is lighter — final mass per variant drawing |
Balancing | G2.5 standard, G1.0 optional |
Test condition | Room temperature, S235JR polished steel plate, thickness 10 mm; measured pull normally meets or exceeds nominal |
Customized features of this build
Feature | This variant |
Core construction | Weight-reduced machined core, flux-path-verified material removal |
Shell surface before coating | Diamond knurl for mechanical rubber keying |
Working surface | Elastomer encapsulation, fully sealed — no exposed magnet |
Elastomer options | PU / NBR / HNBR / EPDM, selected by media and temperature |
Tread hardness | Typically 70–90 Shore A |
Tread thickness | Specified per application (clearance + traction budget) |
Corrosion protection | Encapsulation replaces plating as the primary barrier; plated variants (Ni-Cu-Ni, 48 h+ salt spray) still available |
Mounting interface | Unchanged: 25H7 bore + keyway, machined after lightening |
Note: pull force is specified for the bare steel tread condition. The encapsulated layer adds a defined elastomer gap at the contact interface; the effective adhesion on your surface depends on tread thickness and coating condition — send us your gap budget and we will confirm the achievable holding force with test data, not estimates. |
Dynamic wall-climbing robots. Platforms that accelerate, turn and transition frequently benefit twice — from the lower rotating mass in the drivetrain and from the higher-friction sealed tread at the contact patch. This is the configuration the featured build was engineered for.
Ship hull and offshore-structure maintenance. Salt spray and wash-down chemistry attack exposed magnets and plating; the encapsulated tread takes that punishment instead, and the compliant surface holds through marine coatings and growth.
Storage-tank and pressure-vessel crawlers. Painted and coated steel demands a tread that grips without grinding the coating away — and a sealed wheel that survives the abrasive, solvent-laden environment inside a tank.
Pipeline and curved-structure inspection. The elastomer layer conforms to curvature and weld crowns, keeping contact area where a rigid wheel would ride over the seam and lose force.
Any duty where debris, water or chemicals meet the wheel. Foundries, machine-tool chips, outdoor steel structures — anywhere an exposed magnetic face would eventually chip, corrode or load up with swarf.
This wheel is one documented example of our customization method. The standard FZW80 stays in the catalog unchanged; around it we can configure:
l Mass: weight-reduced cores across the W Series (FZW80 and larger), tuned to your inertia budget
l Tread: material (PU/NBR/HNBR/EPDM), hardness, thickness, and full or partial coverage
l Core interface: bore, keyway, through-bore, custom hub, balancing grade
l Magnetic circuit: magnet grade and temperature class, pole count, and Halbach array options where adhesion-to-weight is critical
l Verification: pull-force testing on your specified plate material and coating, flux mapping, and dimensional inspection on every shipment
Send us the robot mass, target speed, surface condition and gap budget. Our engineers will return an adhesion-and-inertia analysis, a recommended configuration, and a prototype plan — typically with fast sample turnaround and an MOQ of 4 pieces for custom builds.
Tell us what your wheel must survive. We will build the FZW80 that does it. |
All figures in this copy are taken from the company W Series parameter table for the FZW80: Ø80 × 40 mm, 25H7 bore, 8 mm key width, 26.7 mm keyway depth, 630 N pull force, 1.45 kg mass, −40 °C to +100 °C, MOQ 4 pieces, G2.5/G1.0 balancing, S235JR 10 mm test condition.
The weight-reduction percentage, encapsulation layer thickness and hardness are not fixed values in the parameter table; the copy therefore phrases them as per variant drawing, per application, or typical. Once measured data is available, the phrase final mass per variant drawing can be replaced with the exact mass and reduction percentage.
Recommended product image order: the finished wheel as the primary image, the knurled shell as the process-detail image, then a comparison with the standard FZW80 if available.
Prepared for FAIZEAL · Ningbo Fengzheng Magnetic Application Technology Co., Ltd. · fzmag.com · Google store product page copy, FZW80 lightweight rubber-coated magnetic wheel · 2026
Right-angle transmission, parallel transmission, wall-climbing robot
Right-angle transmission, parallel transmission, wall-climbing robot